- Ensure floor is thoroughly clean and dry by vacuuming or wiping with a cloth.

1. Lightly spray ORECK Timber Works™ Floor Cleaner in a 6'x6' (1.83m2) area. Do not over saturate.
2. Allow to sit for about one minute to enable the cleaner to cut through any built-up grease and dirt.
3. Attach the White Polish Pad to the ORECK Orbiter and thoroughly scrub the prepared area.
4. Repeat these steps if required.

1. Ensure floor is thoroughly clean and dry by vacuuming or wiping with a cloth.
2. Attach the drive pad holder to the Orbiter, then fit the White Polishing Pad and apply a thin coat of ORECK Buffable Floor Wax to the flooring.
3. Apply to complete floor area ensuring that the wax is evenly spread and thoroughly worked into the flooring. Work Orbiter from side to side and spread out the Floor Wax to a thin coat.
4. Let wax dry for 20 minutes. Repeat polishing and buffing steps if required.