1. Vacuum floor to remove surface dirt and debris.
2. Dilute ORECK Stone Clear Bottom™ 180-240ml per 6.7pints of warm or cold water.
3. Apply to floor with a mop or sprayer and let set for three minutes.
4. Scrub with Oreck Orbiter using the Union Brush.
5. Absorb excess solution and dirt with wet/dry vacuum or mop.

1. Cover all surfaces that are not stone before use.
2. Vacuum floor to remove surface dirt and debris.
3. Spray water on the surface and then apply a dab of Michelangelo's Marble Restorer™ (2inch diameter per 16 sq. ft. of surface).
4. Approximate usage is one ounce per five sq. ft. per 160 sq. ft. per bottle. 5. Begin buffing area with the Oreck Orbiter using the Union Brush.
6. Buff for five or more passes. Do not let the restorer dry, spray additional water if necessary.
7. Check the results by removing with a squeegee. Reapply or continue to buff if necessary.
8. Remove solution with a squeegee, wet/dry vacuum or clean mop.
9. Immediately wet mop the surface with a mix of 59ml of Stone Clear Bottom™ per 6.7pints of warm or cold water, making sure that all of the Michelangelo's Marble Restorer™ has been removed.
10. Let dry completely.

1. Surface must be clean and free from grit and debris and remain dry for 24 hours prior to and after application.
2. Completely wet the surface by spraying ORECK Rock Solid™ onto the area, and agitate with the Oreck Orbiter using the Carpet Shampoo Brush.
3. If excess remains on the floor after five minutes, wipe off with a cloth.
4. If the surface absorbs all of the sealer after five minutes, reapply, wait another five minutes, and wipe off.
5. Allow three hours after application before walking on the surface.

- Never store Orbiter with brushes attached as it will deform them.
- If brushes become deformed they can be rejuvenated by placing them in a tub of very hot water. This will prolong their life.
- Use Michelangelo's Marble Restorer™ every three to six months.
- If scratches are deep and severe, contact a professional stone restoration company.
- Always wear protective clothing such as safety goggles, gloves and footwear when using Michelangelo's Marble Restorer™.
- Do not smoke when using Michelangelo's Marble Restorer™.