1. Vacuum floor to remove surface dirt and debris.
2. Dilute ORECK Grunge Attack™ 180-240ml per 1.67pints of warm water.
3. Apply to floor with a mop or sprayer and let set for three minutes.
4. Scrub with Oreck Orbiter using the Union Brush.
5. Absorb excess solution and dirt with wet/dry vacuum or mop.

1. Surface must be clean and free from grit and debris and remain dry for 24 hours prior to and after application.
2. Completely wet the surface by spraying ORECK Rock Solid™ onto the area, and agitate with the Oreck Orbiter using the Carpet Shampoo Brush.
3. If excess remains on the floor after five minutes, wipe off with a cloth.
4. If the surface absorbs all of the sealer after five minutes, reapply, wait another five minutes, and wipe off.
5. Allow three hours after application before walking on the surface.

- Never store the machine with the brushes on it, as it will deform them.
- If brushes become deformed they can be rejuvenated by placing them in a tub of very hot water. This will prolong their life.